Commit message

acquisition_config.json

@@ -1,9 +1,9 @@
 {
-  "amqp_url": "127.0.0.1",
+  "amqp_url": "25.10.82.120",
   "amqp_port": 5672,
   "amqp_vhost": "/",
-  "amqp_id": "username",
-  "amqp_pw": "password",
+  "amqp_id": "sdt",
+  "amqp_pw": "251327",
   "amqp_queue": "gseps-mq",
   "amqp_ReadyQ": "gseps-ready", 
   "AccessKey": "AKIAQB3AM4WP76ND6Z6C",
@@ -13,7 +13,7 @@
   "gseps_stage_bucket":"stage-gs-eps-frontend",
   "BucketKey": "sdt/mv_bottom_ash_particle_size",
   "S3BucketName": "gseps-data",
-  "image_save_path": "/home/sdt/Workspace/gseps-edge/image_bucket",
+  "image_save_path": "/home/sdt/Workspace/gseps_edge/image_acquisition/capture/",
   "laser_save_path": "/home/sdt/Workspace/gseps_edge/laser/laser_value",
   "fail_log_file": "/home/sdt/Workspace/gseps_edge/image_acquisition/logs/fail_message.log",
   "success_log_file": "/home/sdt/Workspace/gseps_edge/image_acquisition/logs/acquisition.log",

acquisition_config.json.test

@@ -0,0 +1,23 @@
+{
+  "amqp_url": "127.0.0.1",
+  "amqp_port": 5672,
+  "amqp_vhost": "/",
+  "amqp_id": "username",
+  "amqp_pw": "password",
+  "amqp_queue": "gseps-mq",
+  "amqp_ReadyQ": "gseps-ready", 
+  "AccessKey": "AKIAQB3AM4WP76ND6Z6C",
+  "SecretKey": "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",
+  "Boto3SignatureVersion": "s3v4",
+  "Boto3RegionName": "ap-northeast-2",
+  "gseps_stage_bucket":"stage-gs-eps-frontend",
+  "BucketKey": "sdt/mv_bottom_ash_particle_size",
+  "S3BucketName": "gseps-data",
+  "image_save_path": "/home/sdt/Workspace/gseps-edge/image_bucket",
+  "laser_save_path": "/home/sdt/Workspace/gseps_edge/laser/laser_value",
+  "fail_log_file": "/home/sdt/Workspace/gseps_edge/image_acquisition/logs/fail_message.log",
+  "success_log_file": "/home/sdt/Workspace/gseps_edge/image_acquisition/logs/acquisition.log",
+  "capture_single_time_interval": 1,
+  "capture_batch_time_interval": 120,
+  "laser_device_path": "/dev/ttyS0"
+}

framework.yaml

@@ -8,5 +8,5 @@ spec:
     package: requirements.txt # 설치할 Python 패키지 정보 파일입니다.(기본 값은 requirement.txt 입니다.)
     runtime: python3.8
 stackbase:
-  tagName: v0.0.1 # Stackbase(gitea)에 릴리즈 태그명 입니다.
+  tagName: v0.0.2 # Stackbase(gitea)에 릴리즈 태그명 입니다.
   repoName: gseps-image-acquisition # Stackbase(gitea)에 저장될 저장소 이릅니다.	

js_light.py

@@ -0,0 +1,96 @@
+import time
+import serial
+import argparse
+
+#======Serial Variable=======
+# SERIAL_PATH = "/dev/serial/by-path/pci-0000:00:14.0-usb-0:2:1.0-port0"
+SERIAL_PATH = "/dev/ttyS1"
+BAUD_RATE = 19200
+PARITY='N'
+STOP_BITS=1
+BYTE_SIZE=8
+TIMEOUT=1
+#============================
+
+ser = serial.Serial(port=SERIAL_PATH, baudrate=BAUD_RATE, parity=PARITY, stopbits=STOP_BITS, bytesize=BYTE_SIZE, timeout=3)
+
+
+def light_control(args):
+    global ser
+
+    ch_list=[0, 16, 17, 18, 19]
+    bright = int(args.brightness)
+
+    # if(ch_num == 0):
+    #     print("Channel range : 1~4 // not 0 ")
+    try:
+        # START=(5 & 0xFF).to_bytes(1, byteorder='big')
+        # CH_NUM=(ch_list[ch_num] & 0xFF).to_bytes(1, byteorder='big')
+        # BLIGHT=(bright & 0xFF).to_bytes(1, byteorder='big')
+        # CHK_SUM=(ch_list[ch_num] + bright & 0xFF).to_bytes(1, byteorder='big')
+        
+        # ser.write(START)
+        # ser.write(CH_NUM)
+        # ser.write(BLIGHT)
+        # ser.write(CHK_SUM)
+
+        data = b'\x05\x10\x00\x10'
+        # result = ser.write(data)
+        ser.write(data)
+        # print(result)
+
+    except Exception as e:
+        print(e)
+
+    return True
+
+
+if __name__ == '__main__':
+    parser = argparse.ArgumentParser()
+    parser.add_argument('--brightness', help='adjustment led brightness', required=True)
+    
+    args = parser.parse_args()
+
+    light_control(args)
+
+
+# print(light_control(ser,1,30))
+# time.sleep(1)
+# print(light_control(ser,1,0))
+# time.sleep(1)
+# print(light_control(ser,1,100))
+# time.sleep(1)
+# print(light_control(ser,1,0))
+# time.sleep(1)
+# print(light_control(ser,1,240))
+# 
+# 
+# #for i in range(500):
+# while True:
+#     for i in range(0,50):
+#         light_control(ser,1,i*5)
+#         time.sleep(0.02)
+#    
+#     for i in range(0,50):
+#         light_control(ser,1,255-i*5)
+#         time.sleep(0.02)
+#     print(i)
+
+
+
+# turn_on = [b"\x05", b"\x10", b'\xF0', b'\x00']
+# turn_off = [b'\x05', b'\x10', b'\x00', b'\x10']
+# 
+# rqt_status = [b'\x05', b'\x14', b'\x00', b'\x14']
+# remote_on = [b'\x05', b'\x29', b'\x01', b'\x2A']
+# 
+# try:
+#     result = ser.write(b''.join(turn_off))
+#     print(result)
+#     time.sleep(2)
+#     result = ser.write(b''.join(turn_on))
+#     print(result)
+# except Exception as e:
+#     print(f"Error {e}")
+#     port.close()
+

light_test.py

@@ -4,7 +4,7 @@ import argparse
 
 #======Serial Variable=======
 # SERIAL_PATH = "/dev/serial/by-path/pci-0000:00:14.0-usb-0:2:1.0-port0"
-SERIAL_PATH = "/dev/ttyUSB1"
+SERIAL_PATH = "/dev/ttyUSB0"
 BAUD_RATE = 19200
 PARITY='N'
 STOP_BITS=1
@@ -13,7 +13,7 @@ TIMEOUT=1
 #============================
 
 ser = serial.Serial(port=SERIAL_PATH, baudrate=BAUD_RATE, parity=PARITY, stopbits=STOP_BITS, bytesize=BYTE_SIZE, timeout=TIMEOUT)
-
+print(ser)
 
 def light_control(args, ch_num:int):
     global ser
@@ -28,7 +28,7 @@ def light_control(args, ch_num:int):
         CH_NUM=(ch_list[ch_num] & 0xFF).to_bytes(1, byteorder='big')
         BLIGHT=(bright & 0xFF).to_bytes(1, byteorder='big')
         CHK_SUM=(ch_list[ch_num] + bright & 0xFF).to_bytes(1, byteorder='big')
-        
+    
         ser.write(START)
         ser.write(CH_NUM)
         ser.write(BLIGHT)

main.py

@@ -283,11 +283,8 @@ def check_distance():
             exit()
 
         except Exception as e:
-            print(e)
             ser.close()
-            #logger.error(traceback.format_exc())
             # raise
-            #print(e)
             logger.error(f"Error : {e}")
             continue
 
@@ -386,7 +383,7 @@ def main():
 
             laser_value = check_distance()
             event_flag = 0
-            if 50 <= laser_value < 500:
+            if 230 <= laser_value < 240:
                 laser_count = 0
                 event_flag = 1
                 logger.info(f"Capture Start at {laser_value}")
@@ -436,8 +433,8 @@ def main():
                 cam2_image_path = os.path.join(image_save_path, cam2_image_name)
                 cv2.imwrite(cam1_image_path, img_numpy)
                 cv2.imwrite(cam2_image_path, img_numpy_2)
-                print('cam1 path: ',cam1_image_path)
-                print('cam2 path: ',cam2_image_path)
+                #print('cam1 path: ',cam1_image_path)
+                #print('cam2 path: ',cam2_image_path)
 
                 # Upload image to MinIO(inference server)
                 image_list = [cam1_image_path, cam2_image_path]
@@ -451,7 +448,7 @@ def main():
                
                 if publisher.check_server_state():
                     publisher.pub(image_info)
-                print(image_info)
+                #print(image_info)
 
                 ############## CHANGE #######################
                 # Logger Contents Change // MinIO => S3     #
@@ -483,8 +480,8 @@ def main():
                     sdt_s3.Bucket('gseps-daily').upload_file(f'{LASER_SAVE_PATH}/{laser_save_hour}.csv', f'{folder}/laser/{laser_save_hour}.csv')
                     laser_history = pd.DataFrame()
 
-                #if hour == 0:
-                #    upload_to_s3('gseps')
+                if hour == 0:
+                    upload_to_s3('gseps')
 
             laser_count += 1
             time.sleep(0.3)